In stock
Proedge Knife Holder – Small
Robert Sorby has introduced a Knife sharpening jig as an extremely useful accessory for the very popular ProEdge Ultimate Sharpening system.
The Knife sharpening jig consists of a new back plate with a raised wear plate attached, a universal arm, a choice between a small or large knife holder and a set of instructions.
The jig can be fitted to the ProEdge in a matter of minutes and the only equipment needed is a 13mm spanner. The knife holders allow different length blades to be held securely and safely while they are being sharpened.
Both holders have two pins to rest the back of the blade against for positive positioning and two clamping screws to hold the blade in place. A third screw at the back of the holder is a jacking screw which ensures an even pressure is applied onto the blade the full length of the holder.
The aluminium collar (supplied with the kit only) on the shaft of the holder can be adjusted up or down to ensure the correct bevel angle is being achieved on the blade being sharpened.
You must have the complete knife sharpening jig (Product Code: PEKJIGS) to use this accessory.
All major debit & credit cards accepted
Shipping charges to our standard UK delivery area are calculated based on the total weight of the goods ordered.
0 to 2kg Shipping = £4.00
2.01 to 4kg Shipping = £7.00
4.01 to 30kg Shipping = £10.00
30.01 to 50kg shipping = £20.00
50.01 – 999.00kg shipping = £48.00
A surcharge may be applied to remote and offshore areas during the checkout.
Enter your postcode on the checkout page to confirm the exact shipping charge to your delivery address.