Robert Sorby PEKHL Proedge Knife Holder – Large

Proedge Knife Holder – Large

Robert Sorby has introduced a Knife sharpening jig as an extremely useful accessory for the very popular ProEdge Ultimate Sharpening system.

The Knife sharpening jig consists of a new back plate with a raised wear plate attached, a universal arm, a choice between a small or large knife holder and a set of instructions.

The jig can be fitted to the ProEdge in a matter of minutes and the only equipment needed is a 13mm spanner. The knife holders allow different length blades to be held securely and safely while they are being sharpened.

• The small model holds blades up to 8″ long such as pocket and woodcarving knives as well as small vegetable and paring knives.
• The large version holds blades over 8″ long such as hunting knives and kitchen meat carving knives.

Both holders have two pins to rest the back of the blade against for positive positioning and two clamping screws to hold the blade in place. A third screw at the back of the holder is a jacking screw which ensures an even pressure is applied onto the blade the full length of the holder.

The aluminium collar (supplied with the kit only) on the shaft of the holder can be adjusted up or down to ensure the correct bevel angle is being achieved on the blade being sharpened.

You must have the complete knife sharpening jig (Product Code: PEKJIGS) to use this accessory.