Outboard turning is achieved by rotating the headstock of the lathe through 90 degrees, so that the bed of the lathe no longer restricts the maximum diameter.
Consisting of machined steel components, this attachment will allow larger diameter bowls to be turned of up to 457mm (18″) diameter.
The outboard turning attachment fits onto the end of the lathe bed. A swing arm extends away from the bed to give the clearance. A longer tool rest holder is then fitted into one of sockets on the extension arm, depending on the diameter of the blank. The standard tool rest then sits in the holder and height is adjusted in the usual way.
It can be positioned to the front or the side of the work piece as required.
Any other tool rest with a post diameter of 1″ can be used.
Outboard turning is achieved by rotating the headstock of the lathe through 90 degrees, so that the bed of the lathe no longer restricts the maximum diameter.
Consisting of machined steel components, this attachment will allow larger diameter bowls to be turned of up to 457mm (18″) diameter.
The outboard turning attachment fits onto the end of the lathe bed. A swing arm extends away from the bed to give the clearance. A longer tool rest holder is then fitted into one of sockets on the extension arm, depending on the diameter of the blank. The standard tool rest then sits in the holder and height is adjusted in the usual way.
It can be positioned to the front or the side of the work piece as required.
Any other tool rest with a post diameter of 1″ can be used.
All major debit & credit cards accepted
Shipping charges to our standard UK delivery area are calculated based on the total weight of the goods ordered.
0 to 2kg Shipping = £4.00
2.01 to 4kg Shipping = £7.00
4.01 to 30kg Shipping = £10.00
30.01 to 50kg shipping = £20.00
50.01 – 999.00kg shipping = £48.00
A surcharge may be applied to remote and offshore areas during the checkout.
Enter your postcode on the checkout page to confirm the exact shipping charge to your delivery address.
