Used to split a dust extractor hose line into two branches. Ideal for creating a hose network with permanent connections from the extractor to each machine.
In stock
Y shaped splitter with 3 x 63mm ends. Used To split a single hose line into two branches when creating multiple connections.
A hose with internal diameter of 63mm (2.5″) can be attached to any end of the Y-piece and secured with a hose clamp.
When using two branches with your extractor it is recommended to close off any branches which are not in use, so that a higher airflow is achieved down the active branch. We have shut off gates, also known as blast gates, which attach to the Y-Piece using a connector, product code 100SL.
If another fitting, such as a reducer is being fitted to the Y-Piece, use a connector sleeve, product code 100SL. These tapered sleeves form a tight push fit joint.
The splitter is available in a Y or T shape. Choose based on whichever suits the layout of your workshop best. Remember though, a 90 degree corner creates more disturbance in the airflow, reducing the performance of the system. We therefore recommend using the Y-Piece whenever possible.
All major debit & credit cards accepted
Shipping charges to our standard UK delivery area are calculated based on the total weight of the goods ordered.
0 to 2kg Shipping = £4.00
2.01 to 4kg Shipping = £7.00
4.01 to 30kg Shipping = £10.00
30.01 to 50kg shipping = £20.00
50.01 – 999.00kg shipping = £48.00
A surcharge may be applied to remote and offshore areas during the checkout.
Enter your postcode on the checkout page to confirm the exact shipping charge to your delivery address.
