Headstock thread adaptor for woodturning lathes.
If you are not sure about the thread size you need, please refer to our How To guide: How To Measure A Lathe Headstock Thread.
Headstock thread adaptor for woodturning lathes.
To fit onto a lathe with 3/4″ x 16tpi headstock thread.
To mount a scroll chuck (or face plate) with M33 x 3.5mm thread.
Suitable for use with Charnwood Scroll Chucks Nexus3, Viper3 & Viper5. Plus any other brand with a M33 x 3.5mm thread.
Includes 2 x 8mm diameter holes to aid tightening or removal with a knock out bar.
If you are not sure about the thread size you need, please refer to our How To guide: How To Measure A Lathe Headstock Thread.
Compatible with the following Lathes (among others):
Arundel K150
Axminster KWL37
Carba-Tec 4SE
Carba-Tec HM-1A
Carba-Tec HM01V
Carba-Tec HGO-1
Charnwood W811
Charnwood W812
Charnwood W820
Charnwood W821
Clarke CWL12C
Clarke CWL6B
Clarke CH37
Coronet Consort
Coronet Elf
Coronet Hobby
Coronet Major
Coronet Minor
Draper WTL12A
Draper WTL90
Draper WTL100
Kity K8C
Kity K24C
Lumberjack SWL350
Multico WL37
Nu-Tool NWL37
Nu-Tool NWL900
Poolewood PW12-37
Record DML36SH
Record DML305
Record DML305-VS
Record CL3
Record CL4
Rexon WL6V
Sealey SM42
Sealey SM900
SIP 01488
SIP 07789
SIP 01936
SIP 01938
SIP 01940
Toolbank Faithfull
Turncrafter Plus
Tyme 13
Tyme 37
Tyme SL750
Tyme 1737
All major debit & credit cards accepted
Shipping charges to our standard UK delivery area are calculated based on the total weight of the goods ordered.
0 to 2kg Shipping = £4.00
2.01 to 4kg Shipping = £7.00
4.01 to 30kg Shipping = £10.00
30.01 to 50kg shipping = £20.00
50.01 – 999.00kg shipping = £48.00
A surcharge may be applied to remote and offshore areas during the checkout.
Enter your postcode on the checkout page to confirm the exact shipping charge to your delivery address.
