Headstock thread adaptor for woodturning lathes.
If you are not sure about the thread size you need, please refer to our How To guide: How To Measure A Lathe Headstock Thread.
In stock
Headstock thread adaptor for woodturning lathes.
To fit onto a lathe with M33 x 3.5mm headstock thread.
Suitable to mount a Scroll Chuck or Faceplate with a 1″ x 8tpi thread.
The thread adaptor has spanner flats to aid tightening or removal.
This thread adapter has 2 locking screws for securing the adaptor onto the lathe. Centre located 7mm from the end.
Includes 10mm diameter blind hole for tightening or removing using a suitable knock out bar.
If you are not sure about the thread size you need, please download our How To guide: How To Measure A Lathe Headstock Thread.
All major debit & credit cards accepted
Shipping charges to our standard UK delivery area are calculated based on the total weight of the goods ordered.
0 to 2kg Shipping = £4.00
2.01 to 4kg Shipping = £7.00
4.01 to 30kg Shipping = £10.00
30.01 to 50kg shipping = £20.00
50.01 – 999.00kg shipping = £48.00
A surcharge may be applied to remote and offshore areas during the checkout.
Enter your postcode on the checkout page to confirm the exact shipping charge to your delivery address.
