Headstock thread adaptor for woodturning lathes.
If you are not sure about the thread size you need, please refer to our How To guide: How To Measure A Lathe Headstock Thread.
In stock
Headstock thread adaptor for woodturning lathes.
To fit onto a lathe with 1 1/8″ x 12tpi headstock thread.
Suitable to mount a Scroll Chuck or Faceplate with an M33 x 3.5mm thread.
The thread adaptor has spanner flats to aid tightening or removal.
If you are not sure about the thread size you need, please refer to our How To guide: How To Measure A Lathe Headstock Thread.
Compatible with the following lathes (and others):
Myford Maestro
Myford Super 7
Myford ML7
All major debit & credit cards accepted
Shipping charges to our standard UK delivery area are calculated based on the total weight of the goods ordered.
0 to 2kg Shipping = £4.00
2.01 to 4kg Shipping = £7.00
4.01 to 30kg Shipping = £10.00
30.01 to 50kg shipping = £20.00
50.01 – 999.00kg shipping = £48.00
A surcharge may be applied to remote and offshore areas during the checkout.
Enter your postcode on the checkout page to confirm the exact shipping charge to your delivery address.
