Headstock thread adaptor for woodturning lathes.
If you are not sure about the thread size you need, please refer to our How To guide: How To Measure A Lathe Headstock Thread.
In stock
Headstock thread adaptor for woodturning lathes.
To fit onto a lathe with 1 1/4″ x 8tpi headstock thread.
Suitable to mount a Scroll Chuck or Faceplate with an M33 x 3.5mm thread.
The thread adaptor has spanner flats to aid tightening or removal.
If you are not sure about the thread size you need, please refer to our How To guide: How To Measure A Lathe Headstock Thread.
Compatible with the following lathes (and others):
Delta 46-745
General 260
Nova 1624-44
Nova DVR XP
Nova 3000
Omega Stubby
Powermatic 4224
Powermatic 3520B
Record Maxi1
Record Maxi2
Rikon 70-500
Vega 1500 series
Vicmarc VL316
Vicmarc VL348
Woodfast M408V
Woodfast M908V
Woodfast M410V
Woodfast M910V
Specification | Value |
---|---|
Adaptor Type | Exert |
Overall Length | 72mm |
External Thread Size (Fits Into A Chuck) | M33 x 3.5 |
External Thread Length | 29mm |
Internal Thread Size (Fits Onto A Lathe) | 1 1/4" x 8tpi |
Internal thread Length | 27mm |
Register | 6mm |
Minimum Headstock Thread Length | 30mm |
Spanner Flats | 46mm |
Weight | 600g |
All major debit & credit cards accepted
Shipping charges to our standard UK delivery area are calculated based on the total weight of the goods ordered.
0 to 2kg Shipping = £4.00
2.01 to 4kg Shipping = £7.00
4.01 to 30kg Shipping = £10.00
30.01 to 50kg shipping = £20.00
50.01 – 999.00kg shipping = £48.00
A surcharge may be applied to remote and offshore areas during the checkout.
Enter your postcode on the checkout page to confirm the exact shipping charge to your delivery address.