Converts a lathe with a 2MT fitting to use 1MT drive centres, drill chucks or other accessories.
Particularly useful if you have 2 lathes with different sized taper fittings, allowing you to share accessories.
Can be used on the headstock or tailstock of the lathe.
For example: If you have a lathe with a 2MT fitting on the headstock but you want to use a drive centre with a 1MT centre – This adaptor is what you need.
In stock
Converts a lathe with a 2MT fitting to use 1MT drive centres, drill chucks or other accessories.
Particularly useful if you have 2 lathes with different sized taper fittings, allowing you to share accessories.
Can be used on the headstock or tailstock of the lathe.
For example: If you have a lathe with a 2MT fitting on the headstock but you want to use a drive centre with a 1MT centre – This adaptor is what you need.
Shipping charges to our standard UK delivery area are calculated based on the total weight of the goods ordered.
0 to 3kg Royal Mail Tracked 48 = £4.00
3.01 to 30kg Next Day Carrier = £10.00
30.01 to 50kg Next Day Carrier = £20.00
Bulky Items Next Day Carrier = £30.00
50.01 – 999.00kg Palletised Delivery = £54.00
A surcharge may be applied to remote and offshore areas during the checkout.
Enter your postcode on the checkout page to confirm the exact shipping charge to your delivery address.
