Shipping charges to our standard UK delivery area are calculated based upon the total wight of the goods ordered.
0 to 2kg Shipping = £4.00
2.01 to 4kg Shipping = £7.00
4.01 to 30kg Shipping = £10.00
30.01 to 50kg shipping = £20.00
50.01 - 999.00kg shipping = £48.00
A surcharge may be applied to remote and offshore areas during the checkout.
Enter your postcode on the next page to confirm the exact shipping charge to your delivery address.
Robert Sorby 9” Internal Bowl Tool Rest Cross Bar
£34.03 (£28.36 Excl. VAT)
Robert Sorby 767 9” Internal Bowl Crossbar.
This modular system has many design features that make it the MUST HAVE in every wood turner’s workshop.
First choose the Stem that fits your lathe – stems are available in 1/2″,5/8″,3/4″,1″,11/8″, 25mm and 30mm diameter.
Then select, from the Crossbar range, the one that suits your requirements. Screw them together and you have a perfect tool rest.
It is the interchangeability of the system that makes is so simple to use on any lathe. Once you have the stem you can just keep on adding different Crossbars.
The securing flats machined on the Stem ensure a perfect fit when screwed into the tool rest.
The Crossbars are available in three straight bar lengths of 4″,6″ and 9″ together with a 9″ ‘S’ bar for internal and a reverse 9″ ‘S’ bar for external bowl turning. Also available is a box scraper platform for easy access and extra stability into the bottom of boxes.
Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result, when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut.
The cross bars from the Modular Tool Rest System are made from hardened steel, greatly reducing this problem and therefore enhancing the ease and enjoyment for the turner.