Charnwood W791/3 Professional Dust Extractor 1500w, 415v

Powered by a 2hp Induction motor rated for continuous running, up to 8 hours per day. A sturdy frame supports the fan unit and lifts the inlet port to a height of 110cm, which can give increased efficiency when a hose branch goes overhead or stays at bench height.

These larger collectors are ideal for locations where the extractor will be cited a little way from the dust source. The higher flowrate also allows a small system of hose branch lines to be fitted around the workshop to allow extraction from a variety of machines and even 2 at the same time.

The motor drives a riveted steel fan, which creates the airflow, depositing all dust, chips and shavings into the collection bag.

When it comes to emptying the collection bag, a quick release metal strap frees the bag, ready for replacement. Spring clamps hold the new collection bag in position whilst the metal strap is being refitted fitted. Anyone who has changed a bag without that feature will certainly appreciate it. A foam strip around the rim of the collector body ensures a good seal once the strap is clamped shut.

We fit as standard a super fine 2 micron cloth filter making the unit suitable even for MDF dust.

Maximum recommended total hose length is 7 metres @100mm diameter.

Supplied with transparent collection bag, durable steel fan, NVR switch, 4 castors, quick release metal straps, Y branch and 1.6m power cable (No plug).

A 16 amp, 240v electric supply is required to run this machine. We also recommend using a 16amp Type C breaker.

Hose is not supplied as standard, our 100mm diameter transparent hose is recommended, sold by the metre.

We also have a large range of accessories available for connecting your dust extractor to the dust producing machinery. Reducers to join the 100mm diameter hose to the smaller diameter outlets usually found on bench top machinery. Hoods to collect dust from machinery with no purpose made collection points.