Bowl Reversing Jaws 8″ Diameter for Viper2 Chuck.
Bowl reversing jaws, also known as Cole jaws or Flat jaws are most commonly used for remounting finished bowls to re-shape the outside or to remove unwanted spigots, recesses or jaw marks.
Supplied with 2 sets of rubber coated fixings;
8 x 10mm diameter x 17mm long
8 x 10mm diameter x 13mm long
In stock
Bowl Reversing Jaws 8″ Diameter for Viper2 Chuck.
Bowl reversing jaws, also known as Cole jaws or Flat jaws are most commonly used for remounting finished bowls to re-shape the outside or to remove unwanted spigots, recesses or jaw marks.
The outside edge of the jaws are 184mm diameter when closed, 208mm diameter when opened. The work piece is held in place by 8 rubber coated fixings which can be fitted in 4 different positions, in 19mm intervals, depending on the diameter required. A chuck with minimum Jaw travel of 38mm is therefore required to make full use of these jaws.
For bowl diameters from 45mm up to 189mm.
Please note max. rpm 600.
Supplied with 2 sets of rubber coated fixings;
8 x 10mm diameter x 17mm long
8 x 10mm diameter x 13mm long
All major debit & credit cards accepted
Shipping charges to our standard UK delivery area are calculated based on the total weight of the goods ordered.
0 to 2kg Shipping = £4.00
2.01 to 4kg Shipping = £7.00
4.01 to 30kg Shipping = £10.00
30.01 to 50kg shipping = £20.00
50.01 – 999.00kg shipping = £48.00
A surcharge may be applied to remote and offshore areas during the checkout.
Enter your postcode on the checkout page to confirm the exact shipping charge to your delivery address.
