50mm hose is often used to connect to bench top machinery and overhead guards on a table saw.
Smaller diameter hoses like this are better suited for use with a vacuum type extractor, where performance is not impacted by the restricted cross section area. When used with a high volume (bag type) dust extractor, the length of small diameter hose should be kept to a minimum to prevent performance loss.
In stock
Transparent dust extractor hose 50mm (2″) internal diameter.
We have now upgraded to a PU (Polyurethane) product which is 5 times stronger than the traditional PVC.
Its transparency enables blockages to be quickly identified and cleared.
The hose has a right handed, copper coated, steel wire helix to keep its strength and shape. Where static build up is an issue, the wire can be used to add grounding.
Priced per metre, we cut it to length for you.
Maximum single length is 10 metres, if you order more than 10 metres please specify how you would like it cutting in the Delivery instructions during checkout.
For example; Order is 12m, please send as 2 x 6m lengths.
Please note; The hose will be compressed during shipping. When unpacking hose please apply pressure to extend it out to full length before confirming the actual length. The hose is measured and cut in a fully extended position. When hose is simply laid on the floor it will contract and therefore measure shorter than its actual length.
All major debit & credit cards accepted
Shipping charges to our standard UK delivery area are calculated based on the total weight of the goods ordered.
0 to 2kg Shipping = £4.00
2.01 to 4kg Shipping = £7.00
4.01 to 30kg Shipping = £10.00
30.01 to 50kg shipping = £20.00
50.01 – 999.00kg shipping = £54.00
A surcharge may be applied to remote and offshore areas during the checkout.
Enter your postcode on the checkout page to confirm the exact shipping charge to your delivery address.
