Professional Lathe

Product Code:W850

Product Description

DISCONTINUED DECEMBER 2009

This item is no longer available to order and is no longer supported by our spare parts service.
Any accessories listed in the ‘Related Products’ section below, are still available to order online. 

 

The headstock on this professional level lathe can be positioned anywhere along the bed and rotated to any angle so that a comfortable position can always be found for any job. The headstock, toolrest and tailstock are all made from cast iron and have cam-locking levers for fast adjustment.
The lathe is connected to any standard 240volt power supply but an inverter then converts the power to 3 phase to allow a full range of speed control down to 200rpm without losing any torque from the motor. The 3 phase inverter ensures the same amount of power output even when running at low speeds.
A digital display gives an accurate speed reading at all times. A pulley change selects the low or high speed range, low is used for heavier workpieces, high for small diameter pieces or finishing.
The versatility of this machine is further increased with the addition of a reverse direction selector, 36 position pin indexing, hollow headstock and tailstock suitable for long hole boring and a handle for manual rotation.
A cast iron floorstand with four adjustable rubber feet and brackets should you wish to attach a storage shelf completes the package.

Supplied with four pronged drive centre, revolving tail centre, push button spindle lock, centre knock out bar, floorstand, 355mm toolrest, 150mm diameter faceplate, cable and plug.

For those wishing to turn seriously large pieces we offer an outrigger attachment which will allow bowl turning up to 810mm (32″) diameter, with a fully adjustable tool rest.

W850 Specification

Distance between centres 1060mm
Distance over bed 400mm
Motor (Induction) 1100w, 240v
Speed ranges 2(200 – 1600rpm, 200 – 3200rpm)
Spindle thread size M33 x 3.5
Spindle tapers 2MT
Headstock hollow centre diameter 15mm
Tailstock hollow centre diameter 10mm
Toolrest width 355mm
Faceplate diameter 152mm
Headstock rotation 360 (pre sets at 45, 90, 135, 180, 270)
Spindle centre to floor 1130mm
Dimensions (WxDxH) 1790mm x 440mm x 1170mm
Weight 180kg
Rating Trade