10” Table Saw With Floorstand

Product Code:TS10F

Product Description

DISCONTINUED AUGUST 2020

This item is no longer available to order. A limited range of spare parts are still available. Contact our sales office to order.
Any accessories listed in the ‘Related Products’ section below, are still available to order online. 

 

  • Tough, Large Area Steel Working Table
  • Powerful 1500w Motor
  • Quick Action Lock On Rip Fence
  • Rip Fence Can Be Used Left or Right
  • T-Slot Sliding Mitre Fence
  • Floor Stand Included
  • Push Stick Included
  • Runs On Standard 13amp Supply

Superbly priced, entry level table saw capable of a wide range of projects in the workshop.

The saw is supplied with a rigid steel floor stand, lifting the table to a convenient height. The 10″ diameter saw blade is powered by a 2hp motor and able to cut up to 3″ deep in softwoods, hardwoods and man made boards. The blade itself is a 40tooth Tungsten Carbide Tipped (TCT), for fast cutting performance.

The table top is manufactured from steel with 3 additional extension tables giving a large flat area for working with panels. There are 2 slots for the crosscut mitre fence to run in. The crosscut fence can be adjusted to any angle within a 120 degree range. The aluminium fence can then be adjusted to close the gap to the saw blade.

The ripping fence can be used on either side of the blade and locked in position using the quick action clamp. The scale is clearly marked in millimetres, up to 280mm, with a built in reader. The aluminium fence can be used in the High or Low position, the latter allowing very narrow cuts in thin materials.

With safety in mind, the saw is fitted with: thermal overload protection (to protect the motor against over use); an NVR switch (to prevent re-start after a power failure): a push stick with storage clips on the side of the machine, ensuring it can always be located quickly.

Supplied with left, right and rear removable extension tables, floor stand, mitre fence adjustable 60 degrees each way, dust extraction outlet 43mm diameter, 40 tooth TCT blade, push stick, 2.0m cable and UK 3 pin plug.

Table size 730mm x 635mm
Maximum ripping width 280mm (11″)
Blade tilt 90 – 45 degrees
Cutting depth at 90 degrees 85mm (3″)
Cutting depth at 45 degrees 60mm (2.4″)
Blade diameter 254mm (10″)
Blade bore 16mm
Table height 895mm
Motor(carbon brush) 1500w (2hp) 240v
Dimensions (WxDxH) 740mm x 950mm x 1070mm
Weight 23kg
Rating Hobby
Warranty 1 Year
EAN 5060486046119

It is highly recommended that a dust extractor is used at all times with this saw to prevent the harmful build up of dust and chips.