10” Table Saw with floorstand & side extensions

Product Code:W616

Product Description


This item is no longer available to order. A limited range of spare parts are still available. Contact our sales office to order.
Any accessories listed in the ‘Related Products’ section below, are still available to order online. 



  • Flat Aluminium Extruded Table
  • Removable Left And Right Extension Tables
  • Long Rear Extension for Rip Work
  • Powerful 1800w Motor
  • Belt Drive System For Noise Reduction
  • Quick Action Lock On Rip Fence
  • Scale Magnifier On Rip Fence
  • T-Slot Sliding Mitre Fence
  • Floorstand Included
  • Push Stick Included
  • Dust kit Included
  • Runs on Any Standard 13amp Supply

The large table surface area on this machine is made up of the main table, a removable table at the rear and two side extensions. All are manufactured from extruded aluminium to ensure flatness. So that this saw will not take up valuable workshop space when not in use, the two side extension tables can be removed which takes only seconds.
Greater cutting accuracy is obtained by using a belt drive system between motor and blade. This allows the blade to be mounted on a solid bearing guided spindle. The secondary effect of the belt drive is much quieter running than with the traditional geared type of saw seen in superstores.
The 1800w motor gives a 3″ cutting depth and the ripping fence goes out to 17″ which is a big capacity for a saw in this price range.
The inclusion of a FREE dust extraction kit allows dust to be collected from both the saw guard and below the table from a single 40mm connection. It is highly recommended that a dust extractor, such as our model DC50, is used at all times with this saw to prevent the build up of dust and chips inside the collection hood. You will need our 100/35RC to connect up to 100mm hose.

Supplied with left and right removable extension tables, rear extension table, floorstand, mitre fence adjustable 45 degrees each way, dust extraction kit with 40mm diameter outlet, 24 tooth TCT blade, push stick, 2.0m cable and UK 3 pin plug.

Table size with extension tables 950mm x 1060mm
Table size without extension tables 440mm x 660mm
Maximum ripping width 450mm (17″)
Blade tilt 90 – 45 degrees
Cutting depth at 90 degrees 75mm
Cutting depth at 45 degrees 60mm
Blade diameter 254mm (10″)
Blade bore 30mm
Blade Width (Kerf) 2.5mm
Minimum Blade Width (Kerf) 2.4mm
Table height 830mm
Motor(carbon brush) 1800w (2.5hp)
Dimensions (WxDxH) 950mm x 1080mm x 1000mm
Weight 39kg
Rating Hobby
Warranty 1 Year

It is highly recommended that a dust extractor is used at all times with this saw to prevent the harmful build up of dust and chips.